Home

 

All of our crushed products are manufactured from 8 inches diameter cobblestone. When crushed down to the finer sizes, it is a 100 percent crushed product with fresh cleavage planes on all faces.

 

#8 (3/8 inch) Chips These are used to manufacture Bituminous concrete; in macadam surface treatments (seal coating); it is also blended in with D.G.A. material. Used as a driveway “top dressing”

 

#57 (3/4 inch) Clean Crushed Stone This product is used in many applications – in ready mixed concrete; in Bituminous concrete (black top); as a leveling and bedding material under concrete slabs; in filter beds of septic systems; in foundations drains, French drains; combination drains; and driveways.

 

 

1 ½ inch crushed This material is about 85 percent crushed and is used for “track pads”; drains fields; and sometimes used in the installation of a new stone base for driveways, as a sub-base.

 

#4 (1 inch) crushed - This material is used for “track pads”; drains fields; and sometimes used in the installation of a new stone base for driveways.

 

 

Quarry Process Type 5, Class A (D.G.A.) This dense graded aggregate is a non plastic material that we manufacture by crushing down 8 inch cobblestone to minus 1 ½ inch size material. This results in a 100 percent crush count. It is a blend of all sizes from the top 1 ½ inch down to a minus 200 size stone powder. This material is easily leveled and compacts to a very dense, concrete like surface.

We most often recommend this product for use as an aggregate base course for driveways, parking areas, roads and streets. Pipe line contractors request this material when repairing streets. It replaces the material they take out of the ditch and insures good compaction without settlement and can also be applied as a compacted layer under the pipe for bedding.

 

¼ inch “grits” This widely used as an anti skid abrasive material during the winter months by many townships and municipalities. Generally, it is blended with rock salt for that purpose, by the various purchasers to their own specifications.

Concrete block manufactures use these Grits to make a stronger block and reduce cement content. It is used to manufacture concrete pavers; concrete burial vaults; and lawn ornaments. French drains are another application as well as being used in bituminous concrete for tennis court mixes.

The product also is in great demand by golf courses for use as a drainage media under their golf greens

 

 

Product

Round Stone

Crushed Stone

Decorative Stone

Landscape Aggregate

Delaware River Stone

Roofing Aggregate

Sand

Select Fill

Company

History
Human Resources
Safety
Environment
Directions

Contacts

Weight Charts

Material Weights

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

 

 

   

 Open 7 AM to 5PM Mon. - Fri., Sat. till noon

 

 

 

 

 

 

Po Box 277, Route 519, Belvidere, NJ 07823

Accounting and Sales (908) - 475 - 4710  Fax (908) - 475 - 5760

Dispatch (908) - 475 - 4690

 

Equal Opportunity Employers